OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P244B

Diesel Particulate Filter Differential Pressure Too High (Bank 1)

P244B reports a pressure drop across the bank 1 particulate filter that is too large for the current exhaust flow. On GM's 3.0 L LZO the same monitor also catches a leaking or disconnected downstream pipe: depending on the sensor type it compares either the downstream pressure with a limit or the pressure-to-flow ratio, as a Type A code. A heavily loaded filter is the classic cause; on the 2020–2021 Cadillac XT4 with the 2.0 L diesel (LSQ), GM corrected an overstated soot reading that set P244B and reduced power with new ECM software. On 2025 L5P Silverado and Sierra HD, moisture that entered the sensor during washing can set it, so allow a night of drying before replacing parts. Hino calls P244B an incomplete regeneration and raised the torque cut to 70 % on 2013–2016 COE trucks. P2465 covers bank 2.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 4B

Possible causes

  • Filter heavily loaded with soot or ash high
  • Downstream pressure hose leaking or disconnected (GM LZO) medium
  • Water in the differential pressure sensor after washing (GM L5P 2025) medium
  • ECM calibration overstating soot load (Cadillac XT4 diesel, update) low

Symptoms

  • MIL on, often with reduced power
  • High soot level indication in the cluster
  • Regeneration requested repeatedly

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P244B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication