P2449
AIR System High Air Flow (Bank 2)
P2449 is the bank 2 high-flow fault of the AIR system: during or after the air injection phase the second bank receives more air than predicted. Ford assigns it in its 2012 OBD summary to the bank 2 secondary air readiness, next to P0492 for too little flow, so the code belongs to Ford's AIR monitor even though no threshold is published. Likely causes mirror bank 1: a bank 2 shut-off or check valve that does not seal, a relay that keeps the pump running, or a lean signal that does not fit the model. Since excess air only leans out the mixture for a short time, drivers seldom notice anything beyond the warning lamp. The legal basis lies in CARB's AIR monitoring rules. P2448 is the bank 1 code, P0492 the low-flow partner.
Possible causes
- Bank 2 shut-off valve does not seal high
- Pump keeps running due to a sticking relay medium
- Check valve on bank 2 leaking low
Symptoms
- Check engine lamp
- Usually no change in driving behaviour
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2449
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.