OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2448

AIR System High Air Flow (Bank 1)

P2448 means more secondary air reaches bank 1 than the system expects – for example when the shut-off valve leaks, the pump keeps blowing, or the control logic sees a stronger lean shift than modelled. Ford uses the code: its 2012 OBD summary names P0491, P0410 and P2448 as the bank 1 codes behind the secondary air readiness and in-use monitor counters, and Ford's 2014 code list (published for the Boss 302S) marks P2448 as a MIL code. Ford does not publish a threshold for it. CARB's secondary air rules focus on low flow but demand correct function of the whole system, valves included. Common causes are a valve stuck partly open, an air pump relay that sticks, or a leaking check valve. P0491 is the insufficient-flow counterpart, P2449 covers bank 2.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 48

Possible causes

  • Shut-off valve does not seal fully high
  • Pump relay sticks, pump runs longer than commanded medium
  • Leaking check valve in the air path low

Symptoms

  • Check engine lamp
  • Lean-running codes or fuel trim deviation after cold start

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2448

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication