P2446
AIR System Pump Stuck On (Bank 2)
P2446 is the bank 2 entry for a secondary air pump that keeps running after being switched off. The code is meaningful only on engines with a separate pump per cylinder bank or where the system reports pump faults per bank; no manufacturer documents this code publicly. By analogy with GM's bank 1 code P2444, the check would run after the pump is commanded off and look for duct pressure that stays above the model, which points to a stuck relay, a shorted driver or a pump with an internal fault. Under CARB rules, AIR pumps, relays and valves count as comprehensive components and need their own monitoring. A pump that never stops can overheat, wear out quickly and load the battery. P2447 is the stuck-off code for bank 2; P2444 covers bank 1.
Possible causes
- Relay of the bank 2 pump stuck closed high
- Control circuit shorted to power medium
- Faulty output driver in the engine computer low
Symptoms
- Check engine lamp
- Pump keeps humming after the warm-up phase
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2446
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.