OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2441

AIR System Switching Valve Stuck Closed (Bank 1)

P2441 flags a bank 1 secondary air valve that does not open when commanded, so pump air never reaches the exhaust ports. Toyota documents it on 2005–2009 4.7L V8 (2UZ-FE) models such as 4Runner, Sequoia, Tundra and Land Cruiser: bulletin T-SB-0230-12 traces it to debris from the air pump contaminating the valves and lists it next to faults of the No. 2 valves. Subaru names P2441 for the 2011–2015 WRX STI and tells technicians to run the diagnosis for the opposite bank as well, since the root cause may sit there. On systems with a pressure sensor the duct pressure then rises unusually high while the oxygen sensor sees no extra air. Seized valves, a faulty actuator and carbon build-up are common causes. P2440 is the stuck-open partner, P2443 the bank 2 code.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 41

Possible causes

  • Valve seized closed by debris or corrosion high
  • Valve actuator, control solenoid or vacuum supply faulty medium
  • Kinked or collapsed air hose downstream of the valve low

Symptoms

  • Check engine lamp after a cold start
  • Higher cold-start emissions, failed readiness check

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2441

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication