OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P243D

Particulate Filter Regeneration Duration (Bank 2)

P243D says that a regeneration of the bank 2 particulate filter took longer than the calibrated limit. CARB expects the OBD system to notice when a filter fails to regenerate properly under conditions in which it was designed to. No manufacturer publishes this bank 2 code; the bank 1 version P2458 shows what such a limit looks like, for example on VW's 2014 Touareg TDI, where an accumulated regeneration timer above 93.35 min counts as a fault. Low exhaust temperature on that bank, a weak oxidation catalyst, an incorrect temperature or pressure signal and many short trips all drag the process out. A long regeneration costs fuel and puts extra heat into the filter. P243C covers regenerations that come too often, P243E those that end with soot left in the filter.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 3D

Possible causes

  • Exhaust on bank 2 not reaching regeneration temperature (short trips, low load) high
  • Oxidation catalyst on bank 2 converting too little fuel into heat medium
  • Temperature or pressure sensor giving wrong values medium

Symptoms

  • Regeneration seems to run for a very long time (fan, idle speed)
  • Higher fuel consumption
  • MIL on

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P243D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication