OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P243B

Particulate Filter Restriction - Forced Limited Power (Bank 2)

P243B means the second particulate filter is so restricted that the engine controller cuts power to protect engine and filter. Ford documents the code in its 2024–2025 OBD summary for gasoline engines, as part of the petrol particulate filter monitor next to P246C for bank 1. Once the filter has been above 250 °C for 30 s and exhaust flow lies between 400 and 850 m³/h, a normalised back pressure above 1.0 for 5 s sets the fault. That makes it one of the few bank 2 filter codes with public thresholds, and it shows the code is not limited to diesels. Likely causes are a filter overloaded with soot or ash, a dented pipe, or a pressure sensor or hose reading too high. Until the restriction is cleared the engine stays in reduced power. A high soot load on this bank without the power limit is P243F.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 3B

Possible causes

  • Bank 2 filter overloaded with soot or ash high
  • Damaged or blocked exhaust pipe on bank 2 medium
  • Pressure sensor or hose on bank 2 reporting too high a pressure medium

Symptoms

  • Noticeably reduced engine power
  • MIL on
  • Poor acceleration at higher speed

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P243B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication