P2439
AIR System Air Flow/Pressure Sensor Circuit Intermittent/Erratic (Bank 2)
P2439 covers brief dropouts or jumps in the bank 2 secondary air pressure signal. No manufacturer documents this code publicly; the description rests on CARB's demand that every electrical AIR component be checked for circuit faults and rationality, together with the bank 2 sensor layout known from Audi's R8 V10 (sensor G610). Unlike with P2437 or P2438, the signal is valid most of the time, so the fault often vanishes at the workshop. Freeze-frame data, shaking the harness on the exhaust side and looking for heat-hardened insulation or green terminals are the practical steps. Bank 1 uses P2434; a lasting fault would show up as P2435–P2438 instead.
Possible causes
- Loose or corroded terminal at the bank 2 sensor high
- Harness near the exhaust side brittle or chafed medium
- Intermittent internal sensor fault low
Symptoms
- Warning lamp appears now and then
- Code returns after clearing without visible cause
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2439
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.