OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2438

AIR System Air Flow/Pressure Sensor Circuit High (Bank 2)

P2438 is the bank 2 counterpart of P2433: the secondary air pressure signal of the second bank reads above its upper limit. GM mentions P2438 next to P2437 among the codes that block its AIR sensor and flow tests in the 2018 tables, but publishes no row of its own for it, because the engines described there have one air path. For comparison, GM's bank 1 sensor fails above 94–95 % of the 5 V reference. Typical triggers are a signal shorted to supply voltage, an open ground or an internal sensor defect; Audi's R8 V10, which carries a separate bank 2 sensor G610, shows where such a part sits. No public manufacturer document describes the conditions for P2438 itself. While it is stored, the pump and valve tests cannot be judged.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 38

Possible causes

  • Signal wire shorted to reference or supply voltage high
  • Open ground circuit of the bank 2 sensor medium
  • Bank 2 pressure sensor failed internally medium

Symptoms

  • Check engine lamp
  • Secondary air readiness stays incomplete

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2438

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication