P2436
AIR System Air Flow/Pressure Sensor Circuit Range/Performance (Bank 2)
P2436 says the bank 2 secondary air pressure reading is electrically valid but does not match what the system expects. Audi documents the code on the 2017 R8 and R8 Spyder V10: bulletin 2049142 (TSB group 01, 18-56) pairs P243600 with P243700 and has the bank 2 pressure sensor G610 replaced, following the guided fault finding. GM's 2018 tables note that the barometric-quality weighting used for P2431 also applies to P2436, but only on engines with two valves. As on bank 1, the reading is usually compared with ambient pressure with the pump off and on; a drifting sensor, a clogged sensing port or a wrong baro value can all trip it. P2431 is the bank 1 code; P2437/P2438 are the electrical faults.
Possible causes
- Bank 2 pressure sensor drifted or failed (Audi R8 replaces G610) high
- Sensing port or hose on bank 2 clogged or leaking medium
- Wrong barometric reference value low
Symptoms
- Check engine lamp
- Often stored together with P2437
- Secondary air readiness incomplete
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2436
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.