P2435
AIR System Air Flow/Pressure Sensor Circuit (Bank 2)
P2435 is the bank 2 version of the basic signal fault of the secondary air pressure sensor. It exists only where each cylinder bank has its own air path with a sensor, for instance Audi's R8 V10 with the bank 2 sensor G610. GM lists P2435 among its AIR pressure sensor codes in the 2018 tables, but the detailed rows there describe engines with one air path that use only the bank 1 codes, so no threshold is published for P2435 itself. By analogy with GM's P2430, the computer would look for a frozen or missing signal while the pump runs. One pump usually feeds both banks, so a bank 2-only code points to the sensor, its plug or its wiring on that side. P2430 is the bank 1 twin.
Possible causes
- Bank 2 pressure sensor no longer reacts high
- Plug or harness on the bank 2 side damaged medium
- Sensor port blocked by moisture or debris low
Symptoms
- Check engine lamp after cold starts
- Secondary air readiness not reached
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2435
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.