P2432
AIR System Air Flow/Pressure Sensor Circuit Low (Bank 1)
P2432 means the bank 1 secondary air pressure signal has fallen below its valid band – typically a broken signal lead, a ground short or a missing 5 V reference. GM's tables give the limit as under 5 % of the reference (400 failed samples out of 1,000 on the 2005 3.8L V6) and, from 2018, under 6 % for 800 of 1,000 samples; the check runs all the time and is rated Type B. Volkswagen flags the code below 0.40 V on 2014 Beetle and Golf CBFA engines and below 0.5 V on the 2.5L five-cylinder. Because a dead signal makes every flow and valve test meaningless, those tests are suspended while the code is stored. The high-side twin is P2433, bank 2 uses P2437. Drivability is not affected.
Possible causes
- Signal wire open or shorted to ground high
- 5 V reference missing, often shared with other sensors medium
- Pressure sensor failed internally medium
Symptoms
- Check engine lamp, also while driving warm
- Secondary air tests not run
- Other sensor codes if the shared 5 V line is affected
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2432
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.