OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2430

AIR System Air Flow/Pressure Sensor Circuit (Bank 1)

On engines with an electric secondary air (AIR) pump, a pressure sensor in the duct between pump and shut-off valve tells the engine computer whether air is really moving to bank 1. P2430 is the basic signal fault of that sensor. GM applies it in a special way: on the 2005–2006 3.8L V6 and the 2006 Corvette and CTS-V V8s it stands for a reading that stays frozen while the pump is commanded on (average error below 0.5 and variance below 1.0 for more than 5 s, once per trip, Type B with MIL after two trips); the 2018 tables keep this logic. Low and high voltage have their own codes, P2432 and P2433; P2435 is the bank 2 twin. The car drives normally, but the secondary air check cannot finish.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 30

Possible causes

  • Pressure sensor no longer reacts, signal frozen at one value high
  • Sensor port or duct blocked by water, ice or debris from the pump medium
  • Corroded connector or damaged harness at the sensor medium

Symptoms

  • Check engine lamp after two cold starts
  • Secondary air readiness not set, emissions test refused
  • No noticeable change in driving behaviour

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2430

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication