OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P242D

Exhaust Gas Temperature Sensor Circuit High (Bank 1 Sensor 3)

P242D is the mirror case of P242C: bank 1 probe 3 reports more than its plausible maximum, typically because the circuit is open or touches a supply. GM's 2020 diesel tables trigger above 900 Ω after 10 of 20 samples, the 3.0 L LZO above 100 MΩ for an analog probe or above 1,289.85 °C for a digital one; both tables rate it Type A, so the MIL comes on in the first faulty trip. Ford's 2023 diesels react to more than 2.66 V. Deutz describes P242D-00 as a short to battery. Stellantis lists P242D among the exhaust sensor codes of the 2025–2026 Ram 2500/3500 and asks technicians to check battery voltage first and to identify each sensor by name rather than number. Usually the fix is a connector, a harness repair or the sensor itself.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 2D

Possible causes

  • Open signal or return wire, broken by heat or vibration high
  • Connector unplugged or corroded medium
  • Signal wire shorted to a supply voltage medium
  • Low battery voltage during diagnosis (Ram 2025–2026 note) low

Symptoms

  • MIL on in the first faulty trip (GM Type A)
  • Sensor 3 shows an implausibly high temperature or the maximum value
  • Regeneration and DEF dosing restricted

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P242D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication