OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2429

Exhaust Gas Temperature Too High (Bank 2)

P2429 reports excessive exhaust heat on bank 2 and therefore exists only on engines with two separately monitored exhaust branches, such as V diesels with an aftertreatment line per bank. No manufacturer publishes P2429. The bank 1 version P2428 is documented by GM for a 2014 diesel as an immediate Type A fault with several temperature and temperature-rise limits around the oxidation catalyst and the particulate filter; a bank 2 code would be expected to work the same way on its own sensors. CARB requires rationality monitoring for any exhaust temperature sensor that feeds a control strategy. Before replacing hardware, compare the bank 2 readings with bank 1 and look for a misfiring or leaking cylinder on that side.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 29

Possible causes

  • Excessive soot burn in the bank 2 filter high
  • Leaking injector or misfire on bank 2 sending fuel into the exhaust medium
  • Bank 2 exhaust temperature sensor reading high medium

Symptoms

  • Warning lamp with reduced engine power
  • Unusual heat or smell from one side of the exhaust

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2429

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication