OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2428

Exhaust Gas Temperature Too High (Bank 1)

P2428 is a protection code: the exhaust on bank 1 has become hot enough to endanger the aftertreatment, above all the diesel particulate filter. GM's 2014 diesel tables (14OBDG04) list five triggers, any of which fails the test after 6 seconds: about 800 °C ahead of the oxidation catalyst, 900 °C behind it, 800 °C behind the filter, or rises of more than 600 °C across the catalyst and 400 °C across the filter. The fault is Type A, so the lamp comes on at once. The usual origin is an uncontrolled soot burn in the filter, late fuel injected during regeneration or a leaking injector. CARB requires plausible EGT sensors, so a faulty sensor must be ruled out first. Engine power is usually limited.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 28

Possible causes

  • Uncontrolled soot burn in an overloaded particulate filter high
  • Leaking injector or excessive post-injection reaching the catalyst medium
  • Exhaust temperature sensor reading too high medium

Symptoms

  • Warning lamp on immediately, often with reduced power
  • Strong heat or burning smell from the exhaust
  • Particulate filter or catalyst damage in severe cases

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2428

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication