OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P241D

SCR Inducement - Forced Engine Shutdown

P241D marks the last step of the diesel SCR inducement: after repeated warnings about a reductant problem were ignored, the engine module blocks further engine starts. On FCA's 3.0L EcoDiesel (Ram 1500, Jeep Grand Cherokee from 2014) a DEF-related code first triggers a dash message, after 50 miles a restart countdown, and after 150 miles no restart; P241D is then stored and only sets alongside the causing code. A wiTECH routine allows up to 49 more miles. Jaguar Land Rover describes the same code on the Ingenium 2.0D when DEF was not topped up. CARB accepts such inducement strategies as a guard against running without proper reductant. The real fault is the companion code; repair it, then clear and re-run the monitors.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 1D

Possible causes

  • DEF tank run empty after warnings were ignored high
  • Unrepaired SCR or DEF system fault (pump, pressure, quality, NOx sensor) high
  • Causing code erased while the inducement remains active low

Symptoms

  • Engine will not restart, message to service the DEF system
  • Earlier countdown warnings in the cluster
  • Check engine light with further SCR codes

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P241D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication