P241C
Throttle Actuator Control System - Ice Blockage (Bank 2)
P241C is the bank 2 counterpart of P2072 and only makes sense on engines that use a separate electronic throttle per bank. The controller records that the throttle plate of that bank was frozen in place, recognised by a blade that will not follow its command in cold weather. No manufacturer publishes P241C. For bank 1, Ford's 2012 OBD summary lists ice blockage for its second-generation throttle control as a non-MIL fault, while FCA bulletin 09-023-23 (2013-2023 RAM 1500, 3.6L V6) reports P2072 with a MIL, forced limited rpm and no-start in frost, caused by moisture from crankcase ventilation freezing on the blade. Expect reduced power or a no-start until the throttle body thaws.
Possible causes
- Condensate from crankcase ventilation freezing on the throttle blade high
- Water or snow drawn into the intake tract medium
- Damaged or poorly routed ventilation or make-up air hose low
Symptoms
- Reduced power or capped engine speed in frost
- Engine will not start after a cold night
- Warning lamp depending on manufacturer
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P241C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.