Powertrain
generic / SAE
P2415
EVAP Switching Valve Circuit Open
The ECU detects an open circuit on the EVAP switching valve drive line. The valve cannot be commanded between its purge and isolation positions.
SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 15
Possible causes
- Valve coil open high
- Drive line open medium
- Pin pushed back out of connector body low
Symptoms
- Check engine light on
- Possible smell of fuel near tank or engine bay
- Failed emissions inspection
- Loose-cap warning may appear
Inspection / repair
- Difficulty: easy
- DIY: possible
- Estimated cost: 60–250 €
- Estimated time: 0.3–1.2 h
- Component: evap switching valve
- Component: evap wiring
- MIL / check engine light
- emissions-relevant
- drive cycle required
Sources
References
sae:J2012