OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2411

Fuel Cap Sensor/Switch Circuit High

P2411 is stored when the fuel cap sensor or switch circuit reads above its normal window. With a pulled-up signal line this is what an open circuit, an unplugged connector or a short to the battery feed looks like, so it is often the code that follows a bodywork job or a filler-neck replacement. No manufacturer publicly documents P2411 or a threshold for it. The function is known from pressure-based cap monitoring: Ford's OBD summary sets P0457 after refuelling if tank vacuum stays above -8 inH2O for 30 s and uses a dedicated Check Fuel Cap lamp. CARB allows a separate indicator instead of the MIL for a detected cap leak, but circuit faults of the sensor remain normal input-component faults. P2410 is the low counterpart, P2412 the intermittent case.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 11

Possible causes

  • Open signal wire or unplugged connector, e.g. after body or filler-neck work high
  • Signal wire shorted to battery voltage medium
  • Sensor or switch failed open medium

Symptoms

  • Check engine light
  • Cap warning behaves as if the cap were permanently open

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2411

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication