P2409
Fuel Cap Sensor/Switch Circuit Range/Performance
P2409 is the plausibility code of the fuel cap sensor family: the circuit is electrically sound, but the reported cap state does not fit other information. A switch that never changes over a refuelling event, or one that reports closed while the leak test sees a gross leak, would be typical cases. No manufacturer publicly documents P2409. The closest documented logic is pressure-based: Ford's OBD summary flags a loose or missing cap (P0457) when the tank fails to reach -8 inH2O of vacuum within 30 s after refuelling, and clears it once purge vacuum is back above that level. CARB requires input components to be checked for rationality as well as circuit faults. P2408 is the generic circuit fault, P2410/P2411 the low/high signal codes, P2412 a dropout.
Possible causes
- Cap switch mechanically stuck in one position high
- Wrong or damaged cap that does not operate the sensor medium
- Misaligned filler door or neck after body repair low
Symptoms
- Check engine light or fuel cap message although the cap is tight
- EVAP test results may be rejected
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2409
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.