OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2407

EVAP System Leak Detection Pump Sense Circuit Intermittent/Erratic

P2407 reports a pump feedback that jumps around instead of staying steady. On current-measuring DMTL pumps VW's 2014 Golf and Touareg books define it precisely: the pump current fluctuates by more than 1 mA during the reference measurement, or it drops by more than 6 mA for at least 3 s while pumping, checked with the engine off and on. Audi's TSB 2071770 (Q5, Q5 e, Q3, Q7 and others, 2022-23) calls the diagnosis too sensitive and cures it with new ECM software, and VW's 01-23-03 does the same for the 2022 Atlas and Atlas Cross Sport 2.0T before any parts are replaced. Maserati and Jaguar list P2407 too. P2404 is the steady implausibility, P2403 a lost signal. The car runs normally; the warning light is the main effect.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 07

Possible causes

  • Over-sensitive diagnostic calibration, fixed by ECM software update (Audi, VW 2022-23) high
  • Loose contact or corrosion at the pump connector medium
  • Worn pump motor with unstable current draw medium

Symptoms

  • Check engine light, sometimes only after the car has been parked
  • Code returns irregularly after clearing

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2407

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication