OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P23FF

Bank 2 System B Air-Fuel Ratio Imbalance

P23FF mirrors P23FE for bank 2 and can only occur on V, W or boxer engines, because inline engines have no second bank. It means the cylinders on the side without cylinder 1 deviate from each other and the fault is assigned to injection system B, which on Ford's PFDI engines is the port path (lean and rich codes P2BF2/P2BF3). Bank-level monitors on such engines are documented, but under the general codes: GM's 2019 LT5 Corvette V8 fails bank 2 when the normalised oxygen sensor ratio exceeds 0.75, rated Type A and lighting the MIL on the first failed trip, and Ford sets P219B. No manufacturer publishes P23FF. When the fault stays confined to bank 2, the culprit usually sits on that side, such as a port fuel rail, a manifold gasket or several injectors of that bank.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / FF

Possible causes

  • Several port injectors on bank 2 with deposits or wear high
  • Intake manifold gasket leaking on bank 2 medium
  • Supply problem in the port fuel rail feeding bank 2 low
  • Front oxygen sensor or its wiring on bank 2 distorting the signal low

Symptoms

  • Check engine light on
  • Fuel trims of the two banks clearly apart
  • Possibly P2BF2 or P2BF3 as well

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P23FF

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication