OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P23FC

Cylinder 11 Injector B Air-Fuel Ratio Imbalance

P23FC is reserved for cylinder 11, so it can only belong to twelve-cylinder engines that add an extra injector in every cylinder. Such a pairing is hard to find in public engine data. Volkswagen's W12 illustrates the point: its early versions used twelve injectors in the intake manifold, one per cylinder, while the 6.3 FSI of the Audi A8 L W12 switched to direct injection with six-hole high-pressure injectors, again one per cylinder. Neither layout has an injector B. Any twelve-cylinder engine built with dual injection would still fall under CARB's imbalance rule, including the expectation that the code names the cylinder to the extent the detection strategy permits. No manufacturer documents P23FC. Should it appear, compare P21A6, P0311 and the circuit code P21D9 before replacing anything.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / FC

Possible causes

  • Second injector of cylinder 11 delivering a wrong quantity medium
  • Intake leak at cylinder 11 medium
  • Code read from an engine that has no injector B (scan tool or software issue) low

Symptoms

  • Check engine light on
  • Hardly any change in smoothness on a twelve-cylinder engine

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P23FC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication