OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P23FB

Cylinder 10 Injector B Air-Fuel Ratio Imbalance

P23FB marks cylinder 10, the highest cylinder number of a V10. Among dual-injection engines, the Huracán's 5.2 litre unit is the documented case; it adds multi-point injection to direct injection. In its firing order cylinder 10 follows directly after cylinder 5. On a ten-cylinder engine an injector B deviation in cylinder 10 shows up mainly in the bank that includes cylinders 6 to 10, which is why a bank code (P219B) or a misfire code (P0310) may be the only entry. CARB requires imbalance detection for such cars too, and since 2019 to 2021 also tracking of how frequently the check runs to completion in everyday use. No manufacturer documents P23FB publicly. P21A5 and the circuit code P21D8 are the companion codes.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / FB

Possible causes

  • Port injector of cylinder 10 dirty or worn high
  • Injector seal leaking air at cylinder 10 medium
  • Heat-damaged wiring to injector B of cylinder 10 (check P21D8) low

Symptoms

  • Check engine light on
  • Bank 2 or misfire code stored alongside
  • Mostly no noticeable change

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P23FB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication