OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P23FA

Cylinder 9 Injector B Air-Fuel Ratio Imbalance

P23FA concerns cylinder 9, which among passenger-car engines fitted with dual injection realistically means a V10. The best-known example is the 5.2 litre V10 of the Lamborghini Huracán, described as the first V10 to combine direct and multi-point injection. Its firing order 1-6-5-10-2-7-3-8-4-9 alternates between cylinders 1 to 5 and 6 to 10, so cylinder 9 belongs to the second group and fires last. Five cylinders feed each exhaust sensor here, so the share of one faulty cylinder in the measured signal is small; CARB therefore permits a bank-wide or misfire entry if the method cannot isolate the cylinder. No manufacturer publishes P23FA, and NHTSA's bulletin index holds no entry for it. Check P21A4, P0309 and the circuit code P21D7.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / FA

Possible causes

  • Multi-point (port) injector of cylinder 9 deviating high
  • Leak in the intake path of cylinder 9 medium
  • Valve seat or compression problem on cylinder 9 low

Symptoms

  • Check engine light on
  • Little or no effect on the high-revving engine's behaviour
  • Bank trim of the second cylinder group shifted

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P23FA

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication