P23F8
Cylinder 7 Injector B Air-Fuel Ratio Imbalance
P23F8 identifies cylinder 7 and its injector B, so it needs at least seven cylinders, in practice a V8 or V10. Three V8 families using a pair of injectors in every cylinder are on record: Ford's 5.0 Coyote, which gained direct injection on top of port injection for the 2018 Mustang GT and F-150; Toyota's 2UR-GSE with D-4S in Lexus F models and the LC 500; and the supercharged GM LT5 in the 2019 Corvette ZR1, whose port injectors are driven by a separate fuel injection control module and listed as injector B (circuit codes from P21CF, Type A). None of them publishes P23F8; GM and Ford judge imbalance per bank. To narrow cylinder 7 down, use P21A2, the misfire code P0307 and the circuit code P21D5.
Possible causes
- Port injector of cylinder 7 clogged or leaking high
- Fault in the separate injector B driver module, where fitted (e.g. GM LT5) low
- Intake leak at cylinder 7 medium
Symptoms
- Check engine light on
- Fuel trim of one bank off while the other bank is normal
- Rarely a perceptible misfire
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P23F8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.