OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P23F7

Cylinder 6 Injector B Air-Fuel Ratio Imbalance

P23F7 belongs to cylinder 6, the highest-numbered cylinder on a V6 or straight six. Toyota's GR V6 family is a typical carrier: the 2GR-FSE in the Lexus IS and GS and the later 2GR-FKS both use D-4S, in which the port injector supplies part of the fuel next to the direct injector, its share depending on load and engine speed. Ford's PFDI V6 engines follow the same idea. Because the split changes with the operating point, a faulty port injector may only show in the ranges where it delivers much of the fuel, which makes the fault hard to reproduce on a short test drive. CARB requires the imbalance check for these petrol engines, but no manufacturer documents P23F7 itself. Read P21A1, P0306 and the circuit code P21D4 for the same injector.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / F7

Possible causes

  • Port injector of cylinder 6 deviating in the ranges where it carries most of the fuel high
  • Air leak at the intake runner or injector seat of cylinder 6 medium
  • Injection split calibration needing a software update low

Symptoms

  • Check engine light on
  • Fault comes and goes depending on driving style
  • Occasional roughness at low or medium load

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P23F7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication