P23F6
Cylinder 5 Injector B Air-Fuel Ratio Imbalance
P23F6 flags cylinder 5 and is the first code in this row that a four-cylinder engine can never set. Engines with port plus direct injection and at least five cylinders are mostly V6 and V8 units: Ford's second-generation 3.5 EcoBoost V6, first shown in the 2017 Ford GT, Toyota's 2GR-FKS V6 with D-4S, and the V8s named at P23F8. On the Lamborghini Huracán V10, which combines direct and multi-point injection, cylinder 5 closes the first group of five. The code means the trim of that single cylinder points to its injector B, which in these designs is the port injector. Nobody publishes P23F6 with a threshold. Confirm the maker's numbering, then compare P21A0 and the misfire counter P0305 before replacing the injector.
Possible causes
- Port injector of cylinder 5 out of tolerance high
- Intake manifold gasket leaking near cylinder 5 medium
- Intermittent contact in the injector B wiring of cylinder 5 (P21D3) low
Symptoms
- Check engine light on
- Usually no change in performance
- Fuel trim of the affected bank drifts
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P23F6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.