OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P23F5

Cylinder 4 Injector B Air-Fuel Ratio Imbalance

P23F5 concerns cylinder 4, the end cylinder of a four-cylinder engine. Many four-cylinder units now carry two injectors per cylinder: Toyota's 8AR-FTS turbo (D-4ST) and its Dynamic Force engines such as the M20A (D-4S), Hyundai's Smartstream G2.5 GDi and T-GDi, and the updated Ford 2.3 EcoBoost of the 2024 Mustang. With a single bank, all cylinders share one wide-band sensor ahead of the catalyst; GM, for example, rates imbalance from how strongly that signal varies from one firing event to the next. No manufacturer links P23F5 to a vehicle in public papers. If P2BF0 or P2BF1 (Fuel Control System B lean or rich) appear as well, the whole port-fuel path is off rather than one injector. P219F and P21D2 cover the same cylinder.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / F5

Possible causes

  • Deposits or wear in injector B of cylinder 4 high
  • Low-pressure (port) fuel rail problem showing first at cylinder 4 (look for P2BF0/P2BF1) low
  • Air leak at the intake runner of cylinder 4 medium

Symptoms

  • Check engine light on
  • Slight vibration at idle
  • Fuel trim shifted on the single bank

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P23F5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication