OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P23F2

Cylinder 1 Injector B Air-Fuel Ratio Imbalance

P23F2 says that the mixture in cylinder 1 has drifted away from the other cylinders and that the control unit holds the second injector of that cylinder, injector B, responsible. Only engines that feed each cylinder through two injectors can produce it. Toyota first paired a port and a direct injector in each cylinder with D-4S on the 2005 2GR-FSE V6. Ford's 2024 OBD summary shows what the letter means there: the port injectors are checked as Fuel System B (circuit codes P21CF to P21D6), the direct injectors as system A. CARB makes an imbalance check mandatory and asks that the code name the cause as exactly as the method permits. No maker documents P23F2 itself; Ford and GM still report imbalance per bank. Cylinder 1 is by definition on bank 1, so read P219C and P0301 alongside.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / F2

Possible causes

  • Injector B (usually the port injector) of cylinder 1 clogged or dripping high
  • Leaking injector O-ring or intake runner gasket at cylinder 1 medium
  • Loose connector on injector B of cylinder 1 (often with P21CF) low
  • Poor valve sealing on cylinder 1 low

Symptoms

  • Check engine light on
  • Often no noticeable drivability change
  • Slightly rough idle or a misfire count on cylinder 1

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P23F2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication