OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P23E7

EGR C Flow Insufficient Detected

P23E7 means the module calculates less recirculated exhaust through path C than it expects for the current operating point. The valve may well move correctly; the gas simply does not get through, for example because the passage, cooler or valve seat is choked with soot. GM's 2018 diesel tables illustrate the A-side check P0401: measured air mass is compared with a value expected with EGR active, corrected for barometric pressure, and only at steady speed and fuelling, coolant above 60 °C, outside air above −7 °C and ambient pressure above 74.8 kPa; it is Type B after 350 failures. CARB requires low EGR flow to be detected before NOx exceeds its limits. No manufacturer documents P23E7 publicly. Excess flow is P23E8; valve C stuck closed is P23E6.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / E7

Possible causes

  • Soot-choked EGR passage or valve seat on path C high
  • Clogged EGR cooler in path C medium
  • Air mass or pressure sensor reading off, skewing the calculation low

Symptoms

  • Warning lamp after steady cruising
  • Raised NOx at emissions testing

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P23E7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication