P23E2
EGR C Control Circuit Performance
P23E2 is raised when the drive circuit of EGR valve C is electrically intact but the valve does not respond to it as expected: commanded and measured position, or drive current and movement, drift apart. In GM's 2018 diesel calibration the A-side check P0404 compares setpoint and measured position of the high-pressure EGR valve and fails above a 10 % tracking error in 152 of 190 samples, with coolant at least 60 °C and outside air above −7 °C; it is a Type B code. Soot and lacquer, which over time stiffen EGR valves, are the usual reason, a worn gear train or a weak motor the next. No manufacturer documents P23E2 publicly; CARB asks that EGR control be checked for proper function. Circuit faults on valve C: P23E1, P23E3, P23E4.
Possible causes
- Soot and lacquer making valve C sluggish high
- Worn gears or linkage in the valve C actuator medium
- Actuator motor of valve C losing torque low
Symptoms
- Warning lamp after warm-up drives
- Occasional hesitation when EGR is cut
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P23E2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.