P23E1
EGR C Control Circuit/Open
P23E1 covers the electrical drive of EGR valve C, a third exhaust gas recirculation actuator next to valves A and B. Which valve carries the letter C is up to the manufacturer; no carmaker documents P23E1 publicly. The code means the module has found the control circuit open or otherwise faulty. GM's 2018 diesel tables show how the A-side equivalent P0403 works: with the H-bridge driver off and the valve commanded away from closed, a load resistance above 200 kΩ in 96 of 120 samples sets the code as Type B, MIL after two trips. A similar check is plausible for valve C. CARB requires EGR components to be monitored for circuit faults. With this path disabled, NOx rises. Shorts are P23E3 and P23E4.
Possible causes
- Unplugged or corroded connector at EGR valve C high
- Open motor winding or solenoid coil in valve C medium
- Broken drive wire between engine module and valve C medium
Symptoms
- Warning lamp with otherwise normal driving
- Raised NOx at emissions testing
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P23E1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.