OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P23DF

Cylinder 4 Fuel Heater Control Circuit Low

P23DF marks the cylinder 4 heater control circuit as low, which in practice is a short to ground between the control unit and the heater. The channel then stays off until the next start. On four-cylinder engines cylinder 4 is the outermost rail outlet, where the harness often passes brackets and hot components; chafed insulation there, a heating element shorted to its housing and moisture in the plug are the usual suspects, an internally shorted output in the control unit less so. No manufacturer documents P23DF publicly; the CARB rule expects such outputs to be checked for circuit faults. In daily use the fault shows as a rough cold start on one cylinder, sometimes together with a tripped fuse. Its high counterpart is P23DE, the open circuit P23DD.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / DF

Possible causes

  • Chafed insulation on the cylinder 4 heater lead at the rail end high
  • Heating element at cylinder 4 shorted to its housing medium
  • Moisture in the cylinder 4 heater plug medium
  • Shorted channel 4 output in the heater unit low

Symptoms

  • Rough cold start on one cylinder
  • Tripped fuel heater fuse
  • Engine warning lamp, depending on manufacturer

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P23DF

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication