P23DE
Cylinder 4 Fuel Heater Control Circuit High
P23DE means the cylinder 4 heater control circuit is at a high level where the module expects otherwise. Either the line has contact with a voltage source, or the driving stage no longer switches off, so heater 4 may keep running. The risk lies less in starting than in overheating: Bosch states that its heated rail works with fuel temperatures from 70 up to 125 °C depending on system pressure, and that the heating element can tell when it is running in air or vapour. If cylinder 4 keeps heating once the engine is warm, vapour bubbles form at that outlet and hot restarts can suffer. No manufacturer documents P23DE publicly; CARB requires circuit monitoring. Low fault: P23DF, open: P23DD, performance: P23E0.
Possible causes
- Channel 4 driver no longer switching off high
- Cylinder 4 heater line touching a voltage source medium
- Connectors swapped or mismated after repair low
Symptoms
- Hard restart when the engine is hot
- Uneven idle after hot soak
- Engine warning lamp, depending on manufacturer
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P23DE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.