P23CB
Fuel Rail Heater Control Circuit Low
P23CB means the control side of the fuel rail heater reads too low, normally a short to ground between the switching stage and the heating element. Since a rail heater draws a high current, a ground short on its feed can blow the fuse or trip the protection in the driving stage before the fuel gets warm. No manufacturer documents P23CB publicly. Bosch states that its Flexstart heating unit diagnoses shorts on each heating path and reports them to the engine module, which is how a code of this kind reaches the scan tool. CARB requires heated fuel preparation outputs to be monitored for circuit faults. In practice the engine still runs once warm, but cold starts on high ethanol content suffer. P23CA is the open and P23CC the high case.
Possible causes
- Heater feed wire chafed to ground near the intake manifold high
- Heating element shorted to the rail body medium
- Fuel or water in the heater connector medium
- Shorted output stage in the fuel heater control module low
Symptoms
- Difficult cold start with ethanol
- Fuel heater fuse blows repeatedly
- Engine warning lamp, depending on manufacturer
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P23CB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.