P23C5
Engine Coolant Bypass Valve C Position Sensor Circuit High
With P23C5 the position feedback of coolant bypass valve C sits at the top end of its digital range, a reading GM explains as the signal line touching a voltage source. In GM's 2025 summaries for the 3.0L Duramax (25OBDG04B) and a gasoline engine family (25OBDG03B) the limit is identical: a SENT value above 4,050 counts present for 4 seconds within 5 seconds, checked only when the SENT link reports no error and the engine is not cranking. GM rates it Type B, two trips to the lamp. A high reading can also come from a broken ground at the sensor. Until it is fixed the module cannot trust the valve angle, so coolant routing may be wrong. Low readings are P23C4, general circuit faults P23C3.
Possible causes
- Position signal wire shorted to a supply or reference wire high
- Open ground wire of the position sensor medium
- Position sensor in the valve actuator reporting a stuck maximum value medium
- Bent or spread terminals in the valve connector low
Symptoms
- Engine warning lamp on the second faulty trip
- Live data shows bypass valve C near full scale regardless of command
- Heater output or engine temperature behaves unusually
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P23C5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.