P23C3
Engine Coolant Bypass Valve C Position Sensor Circuit
P23C3 is the general electrical fault on the feedback sensor that tells the engine module how far the third coolant bypass valve has turned. On modern thermal management modules this valve is a motor-driven rotary part, so without a valid angle the module loses its closed-loop positioning. No manufacturer documents P23C3 publicly. GM's 2025 engine tables read the same sensor digitally via SENT and only split it into low and high cases (P23C4, P23C5); a fault that fits neither window would fall under this umbrella code. CARB counts such cooling actuators and their sensors among the monitored comprehensive components. The driver may see slow warm-up, a higher or fluctuating temperature gauge and a warning lamp; motor driver faults are P26B7 to P26B9.
Possible causes
- Loose, corroded or coolant-contaminated connector at the valve module high
- Damaged signal, 5 V reference or ground wire of the position sensor medium
- Internal failure of the position sensor built into the valve actuator medium
- Faulty sensor input or reference supply in the engine control module low
Symptoms
- Engine warning lamp
- Engine takes longer to reach operating temperature
- Coolant temperature gauge reads unusually high or unsteady
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P23C3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.