P23BC
NOx Sensor Calibration Memory (Bank 1 Sensor 3)
Every smart NOx sensor carries its own control unit with a memory holding trim and reference data written for that individual probe at the factory. P23BC means this memory in sensor 3 on bank 1 cannot be read or fails its integrity check, so the engine module can no longer trust the readings. No manufacturer documents P23BC publicly. GM's 2025 table hints at what is stored there: for its sensing-element test P23C1, a reference value measured on the new sensor at the supplier plant sits in the sensor EEPROM. Ford's 2023 diesel summary files RAM, ROM and EEPROM checksum errors of the front sensor controller under P2200 instead. CARB treats NOx sensor faults as emission-relevant. P225A and P225B are sensors 1 and 2; a corrupt memory cannot be repaired.
Possible causes
- Memory inside the sensor control unit corrupted or failed high
- Voltage dips or spikes on the sensor supply disturbing the memory medium
- Replacement sensor with a calibration that does not match the vehicle low
Symptoms
- Check engine light on
- Sensor 3 readings ignored by the engine module
- SCR monitoring cannot complete
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P23BC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.