OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P23B5

NOx Sensor Heater Sense Circuit Range/Performance (Bank 1 Sensor 3)

P23B5 says the heater feedback from NOx sensor 3 (bank 1) is present but implausible: the element does not reach or hold the resistance that matches its target temperature. GM's 2025 diesel table 25OBDG04B compares the raw heater resistance of the post-second-catalyst sensor with its target and fails it outside a relative band of 0.06, after waiting 200 s from supply in range and from dew point; 125 of 250 samples, Type A. Ford lists P23B5 for 2023 Super Duty trucks with the 6.7L diesel together with P2209, P22A7 and NOx sensor communication codes (SSM 51750, 51791): harness 14406 chafes on the right-hand EGR cooler near connector C146, so fuse F18 (20 A) is checked first. P23B4 is the open sense line.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / B5

Possible causes

  • NOx sensor harness chafing on a hot component such as the EGR cooler (Ford 2023 6.7L) high
  • Aged heater element whose resistance no longer matches the target medium
  • Blown fuse in the NOx sensor supply after a short medium
  • High contact resistance in the heater connector low

Symptoms

  • Check engine light after one trip
  • Several NOx sensor and communication codes at once
  • SCR warning, sensor 3 not ready

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P23B5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication