OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P23B4

NOx Sensor Heater Sense Circuit (Bank 1 Sensor 3)

Besides its drive line, the heater of a NOx sensor has a sense connection through which its resistance, and with it the element temperature, is measured. P23B4 reports a fault in that sense path for the third sensor on bank 1. GM's 2025 diesel table 25OBDG04B checks the HTemp pin of the post-second-catalyst sensor for an open circuit: 80 of 160 samples, Type A, MIL after one trip. A note in the table says that the Continental Gen 3.5 sensors debounce electrical faults internally for 1.5 s before reporting them, which lets the affected wire be pinpointed. Bulletin 21-NA-149 adds P23B4 to the harness-chafe list of LM2-powered 3.0L trucks from 2021–2022. Heater circuit monitoring is a CARB requirement. P23B5 is the plausibility check, P2208 and P22A6 the other sensors.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / B4

Possible causes

  • Heater sense lead broken between probe and module high
  • Backed-out or corroded terminal at the probe connector medium
  • Internal break in the sensor 3 probe medium

Symptoms

  • Check engine light after one trip
  • Sensor 3 temperature status invalid

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P23B4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication