P23B0
NOx Sensor Circuit Intermittent (Bank 1 Sensor 3)
P23B0 is meant for a third NOx sensor on bank 1 whose circuit faults come and go instead of staying present, so the status the sensor module reports over CAN keeps toggling between valid and faulty. No manufacturer documents P23B0 publicly, and none publishes a threshold for it; GM's 2025 diesel table, which details several other sensor 3 codes, does not list it. HELLA's workshop guidance on NOx sensors names plug connections and wiring harmed by moisture, grime and road salt and recommends checking supply and bus communication – a good fit for a fault that keeps returning. CARB requires circuit faults on NOx sensors to be detected. P23AC is the steady circuit fault; P2204 and P22A2 are the intermittent codes of sensors 1 and 2. The MIL may go out and come back.
Possible causes
- Loose or fretting terminal in a sensor 3 connector high
- Harness rubbing or flexing near the exhaust, breaking contact under vibration medium
- Moisture entering a connector in wet weather medium
Symptoms
- Check engine light that goes out and returns
- Sensor 3 value drops out briefly in live data
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P23B0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.