OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P23AB

NOx Sensor Processor Performance (Bank 1 Sensor 3)

A NOx sensor is a smart part: the probe in the exhaust is wired to a small control unit with its own processor, which runs the heater, evaluates the cell currents and reports over CAN. P23AB means that this electronics in sensor 3 of bank 1 – usually the one behind a second SCR catalyst – reports an internal error or fails its self-checks. No manufacturer documents P23AB publicly. Ford's 2023 diesel OBD summary shows what such checks contain for its front sensor: RAM failure and ROM or EEPROM checksum errors, reported there under P2200. CARB requires NOx sensors to be monitored for faults that make them unusable for the SCR checks. P06EA and P06EB are the processor codes of sensors 1 and 2. Repair normally means a new sensor.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / AB

Possible causes

  • Internal electronics of the sensor 3 control unit defective high
  • Supply voltage dips or poor ground resetting the sensor electronics medium
  • Sensor control unit damaged by heat or water ingress low

Symptoms

  • Check engine light on
  • Sensor 3 values missing or frozen in live data
  • SCR or emissions warning on the display

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P23AB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication