P23A8
Exhaust Heat Exchanger Exhaust Bypass Valve B Position Sensor Stop Performance
P23A8 concerns the position feedback of exhaust bypass valve B at its mechanical end stops. Systems with a position sensor learn the readings at the fully open and the fully closed stop and compare later readings with them; if a stop value drifts out of its window, or the flap no longer reaches the stop at all, this code is set. Causes range from a carbon-fouled or bent flap to a slipping sensor or a worn actuator. No manufacturer documents P23A8; for valve A the equivalent is P25D6. Ford lists the valve A position sensor code P2C23 together with corroded exhaust coolant temperature sensor connectors (SSM 52543) and with a worn heat exchanger actuator (SSM 53003). CARB requires rationality checks on such inputs. Driveability normally stays unchanged.
Possible causes
- Deposits or a bent flap keep valve B from reaching its end stop high
- Position sensor in the actuator drifted or loose medium
- Play in the actuator gearing medium
- End stops not relearned after a repair low
Symptoms
- Check engine light on
- Valve position in live data does not reach the expected end value
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P23A8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.