P23A1
O2 Sensor Exhaust Sample Error (Bank 2 Sensor 2) - Duplicate Listing of P237B
P23A1 is listed with the same title as P237B: the bank 2 oxygen sensor behind the catalyst reports something that cannot be genuine exhaust from that bank. Only engines with two exhaust banks and a downstream sensor on each side could produce it. No published OBD summary or bulletin assigns P23A1, and no source gives it its own meaning; it is thus a duplicate listing of P237B, itself without public manufacturer use. A comparable plausibility check is documented only for a front sensor, Volkswagen's P2414 on the 2014 Golf. Should the code appear, the manufacturer's definition takes precedence; practical checks cover air leaks on the bank 2 pipe, sensor position and wiring. CARB demands that rear sensors are monitored because catalyst diagnosis depends on them.
Possible causes
- Scan tool reporting the duplicate number high
- Leak in the bank 2 exhaust pipe ahead of the rear sensor medium
- Damaged wiring or connector of the bank 2 rear sensor low
Symptoms
- MIL on, engine runs normally
- Readiness for catalyst monitor stays open
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P23A1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.