OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P23A0

O2 Sensor Exhaust Sample Error (Bank 1 Sensor 2) - Duplicate Listing of P237A

P23A0 repeats, word for word, the title of P237A in the usual code lists: the rear oxygen sensor of bank 1 does not see, or does not report, a representative sample of post-catalyst exhaust. No manufacturer uses P23A0 in any published OBD table or service bulletin, and no source defines it differently, so it is a duplicate listing of P237A. Even P237A has no public manufacturer application; the method is known only from the front sensor, where Volkswagen documents P2414 for the 2014 Golf with fixed signal windows. If a tool reports P23A0, check the maker's own code text first, then inspect the exhaust ahead of sensor 2 for air leaks and the probe's mounting. CARB requires monitoring of rear sensors used for catalyst checks.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / A0

Possible causes

  • Scan tool code table using the duplicate number high
  • Air leak in the exhaust ahead of the rear sensor on bank 1 medium
  • Sensor mounted poorly or element contaminated low

Symptoms

  • MIL on, no drivability change
  • Catalyst diagnosis unreliable or incomplete

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P23A0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication