OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P239F

O2 Sensor Out of Range During Deceleration (Bank 2 Sensor 2) - Duplicate Listing of P2379

P239F appears in code lists with the identical title already given to P2379: the post-catalyst oxygen sensor of bank 2 is out of range while the injectors are switched off on a closed throttle. Neither code has a published manufacturer application; the only documented member of this deceleration check is GM's bank 1 code P232F on the single-bank 2023 L5P diesel, so a second bank never occurs there. No source assigns P239F a separate meaning, which makes it a duplicate listing of P2379. If it is ever read out, the manufacturer's code text decides; diagnosis would follow the bank 2 rear sensor: look for exhaust leaks ahead of it, check wiring and compare its overrun reading with the front sensor. CARB requires such fuel-cut checks for rear sensors.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 9F

Possible causes

  • Scan tool listing the duplicate number for a maker-specific fault high
  • Aged rear oxygen sensor on bank 2 medium
  • Air leak in the bank 2 exhaust ahead of the sensor low

Symptoms

  • MIL on, engine runs normally
  • Catalyst monitor may not complete

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P239F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication