OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P239E

O2 Sensor Out of Range During Deceleration (Bank 1 Sensor 2) - Duplicate Listing of P232F

P239E carries in common code lists exactly the same wording as P232F: a downstream oxygen sensor on bank 1 reading outside its expected window while fuel is cut on deceleration. No manufacturer, OBD summary or service bulletin on record uses P239E, and no source gives it a meaning of its own. The documented version is P232F, which GM applies to the 2023 6.6L L5P Duramax, comparing sensor 2 with sensor 1 in overrun (window +3.01 to −3.18 %, Type B). P239E is therefore best treated as a duplicate listing. Should a scan tool show it, read the maker's own code definition and freeze-frame data, then test the rear sensor as for P232F; CARB requires a rich-to-lean check of rear sensors during fuel shut-off.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 9E

Possible causes

  • Scan tool code table showing the duplicate number instead of the maker's code high
  • Aged or drifting rear oxygen sensor on bank 1 medium
  • Exhaust leak ahead of the rear sensor low

Symptoms

  • MIL on without noticeable driving change
  • Code text in the scan tool contradicts the manufacturer's documentation

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P239E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication