OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P239D

Diesel Intake Air Flow B Control System - Low Air Flow Detected

P239D is the mirror image of P239C: the measured fresh-air mass remains below target although the control loop involving the B intake throttle is already at its limit. Candidates are an EGR valve that will not close and floods the intake with exhaust gas, a B flap stuck partly shut (often together with P2395), a restricted air filter or charge-air path, a turbocharger delivering too little, or an air-mass meter reading low. No manufacturer is known to publish P239D. Ford's 2023 diesels check the same condition for their one intake throttle as P02ED, with a detection time of ten seconds on the 6.7 L engine and half that on the 3.0 L. As the engine is short of air, black smoke, rapid soot loading of the DPF and a loss of power are typical; limp mode is possible.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 9D

Possible causes

  • EGR valve stuck open high
  • B throttle stuck partly closed medium
  • Clogged air filter or restricted charge-air path medium
  • Contaminated air-mass meter reading too low medium
  • Turbocharger delivering too little boost low

Symptoms

  • Loss of power, possibly limp mode
  • Black smoke
  • Frequent particulate filter regenerations

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P239D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication